How do I program my Dish Hopper remote to my Emerson TV?

Have you recently purchased a Dish Hopper remote but are having difficulties programming it to your Emerson TV? Don’t worry – this guide will walk you through the process step-by-step so that you can get your remote up and running in no time!

Step 1: Turn on your television and ensure it is on the correct input. This will allow the remote to detect the device.
Step 2: On the side of your Dish Hopper remote, press and hold both the “TV Power” and “Select” buttons for five seconds.
Step 3: Release both buttons. The LED light at the top of your remote should blink twice, indicating that it is ready for programming.
Step 4: Press the “TV Power” button once. The LED light should blink twice again.

Step 5: Enter Emerson’s manufacturer code into your remote. Depending on which model of Emerson TV you have, this code will be either 0386 or 0741. If one code doesn’t work, try entering the other one until you see the LED light blink twice again.

Step 6: Test out all of your TV functions such as channel changing, power off/on, volume control, etc., using your newly programmed Dish Hopper remote to make sure everything is working properly.

Step 7 (Optional): To save battery life, press and hold down both the “TV Power” and “Select” buttons simultaneously for a few seconds until the LED light turns off completely. This will put your Dish Hopper remote into sleep mode until you need it again.

Conclusion: Programming a Dish Hopper Remote to an Emerson TV may seem daunting at first, but with this step-by-step guide it can be done quickly and easily! Follow these instructions carefully and soon enough you’ll be able to take advantage of all that a universal remote has to offer! With its simple setup process, anyone can become an expert at programming their remotes in no time! Good luck!